Door Security Locks and Strikes
Magnetic Locks & Strikes
A door strike generally is unpowered until a valid code or card is used to open it. Therefore, it is classed as fail safe. If the power fails it stays locked. This device is used where the door is only required to be locked from one side and free egress is allowed, i.e. emergency exit. A maglock requires power at all times to stay locked, as it is an electromagnetic device. When a valid code or card is presented, the power will be cut to allow the door to open. This means if there is a power cut the door will remain open. To avoid this these doors can be equipped with both a maglock and door strike. When a maglock is used, a permit is required by the Fire Department and the manual pull station by the door has to be changed to one with an extra contact to release the maglock in case of an emergency. All maglocks have to release in the event of a fire alarm. Also, they must not reset when the fire alarm is reset. This must be done by a separate switch. A manual maglock release must also be provided. Maglocks are used in various applications. i.e. Where anti-passback is employed, exits from parking garages into buildings and doors such as glass where a strike is not able to be installed.
Advanced Signaling Products
Magnetic Locks
1000lb lock, size 10.6” x 1.6” x 2.6” @ 12/24 VDC 255mA, Part avail. with DS (Door Switch)
Part # Description
L1000SS Stainless Steel
L1000W Textured White
L1000B Textured Bronze
“Bullet Resistant” 1000lb lock, size 11” x 1.8” x 2.8” @ 12/24 VDC 255mA, Avail: DS (Door Switch)
Part # Description
L1000BRSS Stainless Steel
L1000BRW Textured White
L1000BRB Textured Bronze
"No Image Avail."
"Weather Resistant” 1000lb lock, 8.8” x 1.6” x 2.6” (Plate used increases size slightly) @ 12/24 VDC 255mA
Part # Description
L1000G Stainless Steel only
"Double-Door" 1000lb lock per side, size 23” @ 12/24 VDC 500mA
Part # Description
DBL1000SS Stainless Steel
DBL1000B Textured Bronze
Part # Description
LW1000SS Stainless Steel
LW1000W Textured White
LW1000B Textured Bronze
“Out-Swinging Doors” 1200lb lock, size 10.5” x 2.26” x 3.15” @ 12/24 VDC 300mA
Part # Description
LST11200AL Avail: Aluminum Stealth Design
“Out-Swinging Doors” 1200lb lock, size 10.5” x 2.26” x 3.15” @ 12/24 VDC 300mA
Part # Description
LST1200B Avail: Bronze Stealth Design
"No Image Avail."
ELECTRIC STRIKES
“Fail-Secure or Fail-Safe”, comes with 2 aluminum and 1 stainless faceplate. 12 VDC
Part # Description
STKO1 Avail: Black housing w/Stainless parts "Fail-Secure"
STKO2 Avail: Black housing w/Stainless parts "Fail-Safe"
EXIT/RELEASE BUTTONS
1” Push button,
Part # Description
SWT 01 SS L0 Avail: Raised Red Plastic Button w/Stainless Steel Plate
SWT 01 SS L2 Avail: Raised Red Plastic Button w/Stainless Steel Plate w/LED
2" Push button,
Part # Description
SWT 02 SS L0 Avail: Raised Red Plastic Button w/Stainless Steel Plate
SWT 02 SS L2 Avail: Raised Red Plastic Button w/Stainless Steel Plate w/LED
"Illuminated Exit Button, 5/8" diameter
Part # Description
SWT 05 SS L0 Avail: Raised Plastic Button w/Stainless Steel Plate
"No Image Avail."
RELAY BOARDS
Part # Description
ASRB-1 6,12 or 24 VDC w/2 amp contacts w/25mA Coil Current, size 2” x 2” x 4”, DPDT (2 Form C)
relay
ASRB-1X5 12 or 24 VDC w/5 amp contacts w/40mA Coil Current, size 2” x 2” x 4”, DPDT (2 Form C)
relay
2/amp 5/amp